Factory Cheap Hot Precision Die And Stamping Inc - Precision CNC,Sandblasting Anodized,Laser Cutting | CHINA MARK – Weihua
Factory Cheap Hot Precision Die And Stamping Inc - Precision CNC,Sandblasting Anodized,Laser Cutting | CHINA MARK – Weihua Detail:
Precision CNC
| Machines | Alum extrusion machine |
| Processing | - CNC+Sandblasting Anodized+Laser cutting. – further combined with the polishing/sand-blasting/graining to get the surface finish. – to get the protective layer by anodic oxide coating. – to get the high-gloss and cut/drill effect by hi-speed machine. – to get the logo by engraving. |
| Application | Sonywechat Projector Products |
| NW | 130g |
| Mold | CNC jig |
| Mold open cycle | 4 days |
| Type | OEM Parts |
| Mass production Lead time | 4weeks |
Weihua technology is a CNC precision machining factory;Precision CNC machining services, only for China – China precision CNC machining center, more stable operation, manufacturers direct, lower cost, more preferential purchase;
What are the benefits of CNC precision parts processing?
1, multi-axis control, multi-axis linkage: the commonly used processing center is mostly three-axis linkage, by increasing the swing Angle, increase the rotation coordinate, can constitute a four-axis linkage, five-axis linkage, seven-axis linkage, or even more axis linkage processing center.
2, parallel machine tool: the commonly used processing center function is relatively fixed, the vertical processing center, horizontal processing center, or the processing center, turning center and other combination together, constitute a processing system, increase the machine tool processing range and processing capacity.
3, tool damage alarm: using infrared, acoustic emission, laser and other means of detection, tool detection.In case of tool wear and breakage, timely alarm, automatic compensation or replacement of spare tools should be carried out to ensure product quality.
4, tool life management: for a tool on a number of blades, or a number of tools working at the same time, unified management, improve the processing efficiency.
5, machine overload automatic protection: the machine can automatically protect the machine according to the load in the processing process, when the load exceeds the maximum load set by the machine, the machine automatically shut down.The load size can be set and changed.
6, processing dynamic entity simulation: in the process of processing, the processing state of some parts of the machine is not easy to observe, such as the addition of dynamic entity simulation function, can be observed at any time the processing state of the workpiece, so as to prevent bad phenomena in the processing, such as cutting, overcutting, not only, unreasonable steps.
7. Online detection of workpiece: also known as real-time detection, which means real-time detection of the workpiece in the process of processing and timely detection and modification of errors.This function can effectively avoid the problem of reclamping and positioning caused by the unqualified inspection after the processing, shorten the production time and improve the production efficiency.
8, adaptive control, which has the function of the machine tool can be induced in the process of cutting conditions, such as cutting force, temperature, etc.) change, through the adaptive control system control machine tool change cutting parameter in time, make the machine tools and cutting tools, always maintain the best condition to obtain higher cutting efficiency and machining quality, prolong the service life of cutting tools.
If you are interested in getting in touch with a our sales rep click here
The main process shows as below
Step A:Extrusion machine
Step B:CNC machine
Step C:Auto sand-blasting machine
Step D:Triangle grained machine
Step E:Anodic line
Step F:Hi-gloss drill,cut machine
Step G:Engraving machine
“Our 40,000 square meters facility has the capabilities to meet all your extrusion aluminum, logo plates,precision stamping needs coupled with multiple fabrication options to produce high-quality products solutions. ”
― WEIHUA
Product detail pictures:
Related Product Guide:
We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Factory Cheap Hot Precision Die And Stamping Inc - Precision CNC,Sandblasting Anodized,Laser Cutting | CHINA MARK – Weihua , The product will supply to all over the world, such as: Czech, Austria, Malaysia, We integrate all our advantages to continuously innovate, improve and optimize our industrial structure and product performance. We will always believe in and work on it. Welcome to join us to promote green light, together we will make a better Future!
By Florence from Amman - 2018.06.05 13:10
It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
By Austin Helman from Curacao - 2017.04.08 14:55
