Yadda ake hada karfe da karfe | WEIHUA

Bari mu ɗauki alamar aluminium daga baƙon abokin ƙasashen waje a matsayin misali don nuna muku yadda ake yin aluminium sunan karfe.

Mataki 1:

Yanke kayan, yanke babban katako na kayan aluminium zuwa wani sashi na girman samfurin don amfani.

Mataki 2:

Wankewa, jika kayan danyen a ruwa mai daskarewa da adadi mai kyau na tsawon mintuna 25, sa'annan a saka su a cikin ruwa mai tsafta dan cire mai da mai, daga karshe sai a saka su a tanda 180 ° sannan a gasu na tsawon minti 5 har sai ruwan ya bushe.

Mataki na 3:

Fitar farin, sanya allon 120T akan na'urar buga allo ta atomatik mai lalacewa, yi amfani da wutan lantarki don cire ƙurar ƙasa, sannan amfani da farin mai kayan masarufi 4002 don buga farin, bayan an gama bugawar, saka samfurin a murhun rami zuwa gasa da gasa Bayan yin gasa, saka shi a cikin tanda 180 ° kuma gasa na mintina 15

Mataki na 4:

Fitar da ja, matakan suna kama da mataki na uku, sai dai an canza launin tawada zuwa ja.

Mataki 5:

Bugun shudi, matakan suna kama da mataki na uku, sai dai an canza launin tawada zuwa shuɗi.

Mataki 6:

Buga baki, matakan suna kama da mataki na uku, sai dai an canza launin tawada zuwa baƙi.

Mataki 7:

Gasa, sanya samfurin a cikin tanda na 180 ° kuma gasa tsawon minti 30. Bayan an gama yin burodin, zaɓi zaɓi kaɗan don yin zagaye 50 na gwajin MEK don hana asarar tawada yayin aiwatar da aikin zanawa.

Mataki 8:

Aiwatar da fim din, sanya fim na kariya 80A akan mashin laminating, saka samfurin bayan wucewa grid methyl ethyl ketone 100 akan na'urar laminating don tabbatar da cewa fim din baya latsewa, kuma mai gudanar da aikin yayi Raba.

Mataki 9:

Yin hakowa, cire na'urar harbawa zuwa matsayi ta atomatik da naushi, mai gudanar da aikin ya bincika ramin ramin don tabbatar da cewa raunin ramin bai fi 0.05mm ba.

Mataki 10:

Wanƙwasawa, sanya samfurin a cikin naushi na 25T don bugawa, tsayin daka kamar yadda zane yake.

Mataki na karshe:

Cikakken dubawa + marufi

A ƙarshe, da Alamar aluminum ta kayan aiki an gama.