Menene aluminum extrusion?

Aluminum extrusion: Shin aikin haɗin gwal na almara (nakasawa) ingot extrusion gyare-gyaren tsari tare da mai fitarwa.

Fasahar Allon gami ta Aluminiya

Rarraba sassan sassa:

Sashe mai ƙarfi: babu ramuka a cikin sashin.

Hollow profile: ɓangaren bayanan martaba yana da ramuka.

Tsarin da zane na sauki extrusion mutu:

Tubba guda extrusion ya mutu akwai guda biyu: na farko shine ingantaccen extrusion mutu na biyu shine m profile extrusion die.The takamaiman tsarin shine kamar haka:

1) ganga mai yaduwa: jiki mai silinda mai launuka da yawa wanda aka yi shi da ƙarfe mai ƙarfi mai ƙarfi, wanda za a iya saukar dashi tare da rufin ciki. An ƙaddara tsawon ne gwargwadon ƙararrakin kayan.

2) tallafin tallafi: tabbatar da cewa kayan kwalliyar da kushin sunada hankali, shine a shigar da kayan kwalliyar, kayan kwalliyar karin kayan taimako.

3) die pad: the die pad and the die have the same size, da kauri ne sau 3 na mutu kauri, kuma kai da extrusion matsa lamba tare da die.Die pad, mutu rami size ne dan kadan ya fi girma da mold. : kayan aikin gami

4) latsa bakin: kayan aikin taimako waɗanda ke tabbatar da cewa ƙirar ba ta canzawa yayin ɓarna kuma suna dacewa sosai da ganga mai extrusion. An tsara tsari da girman gwargwadon nauyin mai fitarwar.

5) gasket extrusion: kayan aikin taimako don hana haɗuwa kai tsaye tsakanin mashin extrusion da ƙarfe da aka fitar.sai diamita na waje yayi ƙanƙani da diamita na ciki na ganga mai ƙwanƙwasa, kuma kaurinsa yana tsakanin 40 mm da 150mm.

6) ƙwanƙolin ƙwanƙwasa: lokacin da ƙwanƙolin ƙwanƙwasa ke aiki, yana shiga cikin silinda na extrusion da lambobin sadarwa tare da takalmin extrusion. Bearingaukewar ƙwanƙwasa ya kasance cikin matsakaicin matsin lamba na mai fitar da kayan.Material: 3Cr2W8V.

Mutu ka'idar sanyi rami:

Tsarin rami mai raɗaɗɗen bayanin rami ɗaya raɗaɗɗen tsari: gabaɗaya shine sanya cibiyar ƙirar jujjuyawar da cibiyar ƙira ta zama daidai.Idan bangon kaurin ya banbanta sosai, yakamata a shirya ɓangaren mafi bakin ciki a tsakiyar ginin.

Porous profile die rami sanyi: don karamin sashi ko sashin daidaito ba shi da kyau, yawanci ana amfani da shi mai raƙumi.

Tabbatar da bel mai aiki mai rami:

1) ɗauki ɗayan ɓangaren azaman ma'auni, inda tsayin aikin yake (sau 1.5 zuwa 2) na ƙarancin samfurin da aka gama.

2) tsawon aikin da yake makwabtaka da inda ake nuni shine tsawon aikin da yake aiki a wurin da aka hada shi da 1mm.

3) tare da kauri iri ɗaya, tsayin aikin tsayi a daidai nesa daga tsakiyar maƙerin ɗin ɗaya ne.

4) farawa daga tsakiyar sifar, ƙira da raguwar tsiri na aiki na kowane nesa na 10mm ana iya komawa zuwa adabin da ya dace.

5) wukake marasa amfani a cikin bel din aiki: wukake wukake da yawa zasu raunana karfin bel din aiki.

Block Angle:

Lokacin da tsayin rami mai mutuƙar aiki ya fi 15 zuwa 25mm, a zahiri, ƙarfen ba shi da dacewa da tsiri mai aiki saboda ƙanƙantar girma, a wannan lokacin, ana iya daidaita ƙimar ƙarfe ta Hanyar toshewa. Angle tsakanin busbar da layin tsakiyar extrusion na bel mai aiki shine Angle mai toshewa, kuma mafi ingancin toshe Angle shine digiri 3 zuwa 5.

Mala'ikan Gudun Ruwa: gabaɗaya, Hannun gudana yana da mazugi mai daidaituwa ko mazugi mai jujjuya kan fuskar ƙarshen fuskar fasalin.

Abinda ke sama shine game da menene extrusion na aluminium da kayan fasahar kera kayan aikin almara; Mu masu sana'a ne aluminum extrusion ƙiren ƙarya masana'antu, na iya samar da: arc aluminum extrusion, triangle aluminum extrusion da sauran ayyukan sarrafawa na musamman; Maraba da tuntuɓar ~