Ina alamar alama ta ƙarfe mai alama mafi kyau daga buga allo | WEIHUA

Takardar sunan karfe Alamar karfe ce ta yau da kullun a rayuwarmu da aikinmu, galibi ana amfani da ita don yin tambari na yau da kullun da sigogin bayani, ko yin wasu alamu na tunawa da keɓaɓɓu. Kirkirar sunan karfe yana da sauƙi, mai sauƙi a adana, kuma ana iya yin sa daga bayyanar zuwa kammala kayan aiki ana iya canza shi ta hanyar sigogi da yawa, samfurin da aka gama shima yana da kyau ƙwarai, don haka ana amfani da shi sosai.Menene kayan kayan samfuran ƙarfe? Babban gama gari shine: bakin ƙarfe, gami da alli, alumina, zinc alloy , zinc gami.

Rashin dacewar buga al'adun gargajiya: Bugun allon siliki na gargajiya da buga kushin na iya wucewa na dogon lokaci. Ta hanyar bugawa zuwa saman sunan suna, sannan kuma canja wurin gel silica zuwa saman samfurin, ana wuce hanyar ta hanyar sanya alamar laser. Rashin dacewar sa bayyane yake a fili:

Na farko, juriya mara kyau ne

Amfani da mutane ya tabu sosai, a nan inɗar gwajin takaddar ƙarfe ta fuskar ƙarfe, yawanci gajere ne, akwai matsalar faduwa.

Na biyu, rashin dacewa da yanayi mai wahala

Ga wasu takaddun suna waɗanda aka yi amfani da su a cikin kayan aiki, ana buƙatar yiwa bayanan saiti alama yayin da suka bar masana'anta. Wasu daga cikin waɗannan na'urori suna buƙatar sakawa a cikin aikin waje. Takallan suna waɗanda aka yiwa alama a cikin hanyar gargajiya suna da ƙarancin haƙuri kuma suna iya wahala da lalacewa.

Uku, kayan kwalliya basu isa ba

Don tattara keɓaɓɓu da keɓancewa na wasu aikin sanya alama na ƙarfe, sakamakon amfani da hanyoyin gargajiya bai dace ba, kamar bajim ɗin tunawa, alamun sunan ma'aikaci, da sauransu, duk waɗannan suna buƙatar buƙatun ƙawa. A wannan lokacin, yin amfani da injin alamar laser yana da ƙarin fa'idodi, don haɗuwa da ƙa'idodin ado da na buƙatu.

Iv. Bugun gargajiya ba shi da lamuran muhalli

Alamar laser ba tare da hayaki ba, hanya ce ta aiki ta kare muhalli, kuma aikin samarwa ta hanyar hanyar buga allon suna, yana buƙatar wasu ƙwayoyi masu narkewa da ƙananan ƙarfe da sauran kayan albarkatun sunadarai, ƙila da ɓarnar lokaci don ma'aikata masu aiki suna da tasiri, kuma tawada ma yanayi ne mai canzawa, don mutum da muhalli na iya zama haɗarin ɓoye.

Sabili da haka, tsarin gargajiya na iya yin tantance sunan karfe, amma idan aka kwatanta shi da alamar laser, akwai ƙarin tsaro da kariya ta kyan gani, sabuwar fasahar ita ce a gyara tsohuwar fasahar, na yi imanin cewa alamar ƙarfe alamar karfe ta fi kyau!