High definition Precision Plasma Cnc - CNC Precision,Alum Extrusion,Sandblasting Anodized | CHINA MARK – Weihua

CNC Precision

Weihua technology — CNC precision machining china;Engaged in precision machining CNC, precision plasma CNC and import and export parts processing customized services, mainly using CNC lathe equipment processing, if there is demand, welcome to click on the consultation.

 Points for attention when CNC machining precision parts:

 1. When processing CNC precision hardware parts.Require the operator to maintain the correct posture, to have enough spirit to cope with the work, the operation must be focused, no chatting, cooperate with each other, the operator must not be agitated, tired state of operation, in order to personal safety, to avoid accidents, to ensure operation safety.All employees should check whether their clothes meet the work requirements before entering the work station.Do not wear slippers, high heels and safety clothes, long hair to wear a helmet.

 2. Before the mechanical action, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine empty for 1-3 minutes. It is strictly prohibited to operate when the machine is in trouble.

 3. When starting the power to start the machine, the machine can only be started after all other personnel leave the machine work area and take away the sundries on the work table.

 4. When working mechanically, do not extend your hand into the working area of the slider.In the die to take, release must use the standard tool.If the machine is found to have abnormal sound or machine failure, should immediately turn off the power switch for inspection.After the machine starts, by one person transport materials and mechanical operation, other people shall not press the electric construction or foot pedal switch board, for the safety of others more can not put the hand into the mechanical work area or touch the moving part of the machine with the hand.

 5. When replacing the mold, first turn off the power, and only after the punch movement department stops operation, can the installation and debugging of the mold begin.After the installation and adjustment, the flywheel should be moved by hand to test the impact twice. In order to avoid unnecessary collision between the machine and the products to be processed, the upper and lower molds must be checked for symmetry, reasonability, firmness of screws, and reasonability of the blanking ring.

If you are interested in getting in touch with a our sales rep click here

Contact us

The main process shows as below

Step A:Extrusion machine

Step B:CNC machine

Step C:Auto sand-blasting machine

Step D:Triangle grained machine

Step E:Anodic line

Step F:Hi-gloss drill,cut machine

Step G:Engraving machine

“Our 40,000 square meters facility has the capabilities to meet all your extrusion aluminum, logo plates,precision stamping needs coupled with multiple fabrication options to produce high-quality products solutions. ”

― WEIHUA